CANCOM 2024
Date de la conférence
6 au 9 août 2024
Lieu de la conférence
Waterloo, Ontario, Canada
Coprésidents
John Montesano, Garrett Melenka, et Peter Richter
|
ID
Title / Author
Paper
|
|---|
|
05
THE EFFECT OF AUTOCLAVE PROCESSING ON THE PERFORMANCE OF CF/PPS COMPOSITE LAMINATES
Song Q, Liu W, Li Z, Liu J, Geng Y, Chen J
|
|
06
EFFECTS OF CHITIN NANOWHISKERS ON THE THERMAL AND MECHANICAL PROPERTIES OF THERMOSET EPOXY NANOCOMPOSITES
Singh D, Kumar K, Baby B, Koul S, Guan A, Tavakkoli Avval P
|
|
07
MECHANICAL EVALUATION OF APC-2 POLY ETHER ETHER KETONE ADHERENDS JOINED USING POLY (ETHER IMIDE) FOR REPAIR
Barroeta Robles J, Dubé M, Hubert P, Yousefpour A
|
|
08
DEVELOPMENT OF HIGH TEMPERATURE THERMOPLASTIC COMPOSITES REINFORCED WITH RECYCLED CARBON FIBER AND THERMAL BLACK NANOPARTICLES FOR FUSED FILAMENT FABRICATION
Arslan D, Mihai M, Therriault D, Levesque M
|
|
09
TRANSFERRING THE 3D SKELETON WINDING PROCESS TO INDUSTRIAL AUTOMOTIVE APPLICATIONS: ADVANCEMENTS AND IMPLEMENTATION STRATEGIES
Beck B
|
|
13
ENHANCING MATERIAL MODELING IN ADDITIVE MANUFACTURING: STUDYING A VOID ANALYSIS IN 3D-PRINTED COUPON TEST SAMPLES BY USING MICRO-COMPUTED TOMOGRAPHY (µCT)
Soltansaleki A, Melenka G
|
|
14
BIOINSPIRED CERAMICS: HARNESSING NATURE'S STRATEGIES FOR IMPROVING INTERFACIAL STRENGTH AND ENERGY ABSORPTION
Azad E, Yazdani Sarvestani H, Shadmehri F, Ashrafi B, Hojjati M
|
|
15
PREDICTIVE MODELING FOR DAMAGE AND RESIDUAL LOAD-BEARING CAPACITY OF NON-CRIMP FABRIC COMPOSITES
Kazemian M, Cherniaev A
|
|
16
INVESTIGATING THE VITRIMERIZATION OF A COMMERCIAL THERMOSET RESIN SYSTEM
Ilse J, Hubert P
|
|
17
THERMAL CONSOLIDATION EFFECTS ON FLEXURAL PROPERTIES OF CONTINUOUS REINFORCED 3D PRINTED COMPOSITES
Barbuio T
|
|
18
BIOINSPIRED MANDREL-BED 3D PRINTING ENHANCES DAMGE TOLERANCE OF NANOCOMPOSITE
Patil H, Mondal D, Hashemi S, Willett T
|
|
19
DEVELOPMENT AND CHARACTERIZATION OF THE THERMAL EXPANSION OF FIELD STRUCTURED MAGNETIC COMPOSITES
Wang Y, Mertiny P
|
|
20
FABRICATION OF THERMOPLASTIC COMPOSITE SANDWICH PANLES WITH RECYCLED PET FOAM CORE USING HOT PRESS
Mandegarian S, Hojjati M, Moghaddar H
|
|
21
GRAPHENE/VINYL ESTER COMPOSITES FOR ENERGY APPLICATIONS
Lashkari P, Martin E, Divigalpitiya R, Hrymak A
|
|
24
NEURAL NETWORK CURE KINETICS MODELLING OF CARBON FIBRE SHEET MOULDING COMPOUND
Blanc Soto F, Hubert P
|
|
25
EXPERIMENTAL INVESTIGATIONS ON THE INFLUENCE OF STRAIN RATE ON MECHANICAL PROPERTIES OF DIRECT COMPOUNDED COMPRESSION MOULDED LONG FIBRE THERMOPLASTICS
Khapra T, Mohammadkhani P, Bondy M, Altenhof W
|
|
26
THE DEVELOPMENT OF THE INDENTATION FIXTURE USED FOR MANUFACTURING PRESTRESSED COMPOSITE
Nguyen TV, Melenka GW
|
|
33
ADDITIVE MANUFACTURING OF SMART MULTIFUNCTIONAL COMPOSITES
Bodkhe S, Morali A, Mtar A, Mandal A, Skorobogatiy M
|
|
34
EFFECTS OF SILANE-FUNCTIONALIZED GRAPHENE OXIDE SURFACE TREATMENT ON THE MECHANICAL AND INTERFACIAL BEHAVIOR OF FLAX-EPOXY COMPOSITES
Zhang J, Li Z, Abdin Y
|
|
37
EFFECTS OF ALKALI AND GRAPHENE OXIDE TREATMENT ON MECHANICAL PERFORMANCE OF FLAX-EPOXY COMPOSITES
Li Z, Zhang J, Abdin Y
|
|
38
OPTIMIZATION OF FIBRE ORIENTATION WITH A CONTOUR-BASED FIBRE MAPPING METHOD
Niu B, Steeves C
|
|
43
EVALUATION OF MULTIFUNCTIONAL PERFOMANCE IN STRUCTURAL ENERGY STORAGE COMPOSITES USING MULTIPHYSICS MODELING
Zschiebsch W, Peyrow HD, Kucher M, Böhm R
|
|
45
CHARACTERIZING THE PLY PROPERTIES OF A UNIDIRECTIONAL FLAX-EPOXY COMPOSITE MADE OF A UD-MAT REINFORCEMENT
El Mekhchi EM, Lebrun G, Jean-St-Laurent M, Châtelain J
|
|
46
EVALUATING CLOSED RESIN-INJECTION-&-IMPREGNATION CHAMBERS FOR PULTRUSION PROCESSING OF AROMATIC PU-SYSTEMS AND METHYL METHACRYLATE RESIN SYSTEMS (ELIUM)
Zhang F, Liu J, Engelen H, Henning F
|
|
47
MODELING AND ANALYSIS OF A BI-MATERIAL PULTRUSION DIE PROFILE FOR GLASS FIBER-REINFORCED POLYMER COMPOSITES MANUFACTURING
Looi TR, Saha GC
|
|
49
EFFECT OF CLICK CHEMISTRY MODIFICATIONS AND NANOCELLULOSE INCORPORATION ON THE PERMEABILITY OF MAT AND UNIDIRECTIONAL-MAT FLAX REINFORCEMENTS
Blal A, Lebrun G, Loranger E, Brouillette F
|
|
52
EFFECT OF HEAT TREATMENT ON POROSITY IN ASPHALTENE-DERIVED CARBON FIBERS
Darbandi A, Wong JC
|
|
54
SUSTAINABLE RUBBER BIO-COMPOSITE FOAMS WITH SILANE MODIFIED WOOD FIBER FOR ENHANCED THERMAL AND MECHANICAL PROPERTIES
Chen G, Gupta A, Mekonnen T
|
|
55
TRANSIENT TRANSVERSE DEFORMATION OF THERMOPLASTIC COMPOSITE TAPE IN AUTOMATED FIBER PLACEMENT
Fereidouni M, Hoa SV
|
|
56
COMPOSITE SANDWICH STRUCTURES WITH BI-STABLE MECHANICAL METAMATERIAL CORE
Laxson A, Xu H
|
|
57
THE EFFECT OF EGGSHELL MEMBRANE REMOVAL ON THE POLYLACTIC ACID COMPOSITE CHARACTERISTICS
Homavand A
|
|
58
STRENGTH ANALYSIS OF HYBRID BOLTED/BONDED COMPOSITE JOINTS BASED ON FINITE ELEMENT METHOD
Blier R, Monajati L, Mehrabian M, Boukhili R
|
|
59
FATIGUE LIFE PREDICTION OF FLAX-EPOXY COMPOSITE USING MACHINE LEARNING TECHNIQUES
Shola-Shittu IO, Kolasangiani K, Bougherara H
|
|
61
PROCESSING OPTIMIZATION FOR AUTOMATED DRY FIBER PLACEMENT AND MECHANICAL PROPERTIES OF DRY FIBER REINFORCED COMPOSITES
Geng Y, Liu Y, Liu W, Yuan Y, Yang Y, Song Q, Ning B, Chen J
|
|
62
ANALYSIS OF THE INTERFACE PROPERTIES OF MULTI-MATERIAL FFF PRINTED STRUCTURES
Pahari S, Melenka GW
|
|
63
DEVELOPMENT OF AN ENVIRONMENTALLY-FRIENDLY THERMOPLASTIC COMPOSITE MATERIAL FROM BIO-SOURCED POLYMER AND RECYCLED WASTE TIRES
Kazeruni M, Belkhiri N, Diby I, Nohair B, Kaliaguine S, Ruiz E
|
|
64
MACHINE LEARNING BASED PREDICTION MODELS FOR THE STRENGTH OF RICE HUSK ASH-CONCRETE: EMPIRICAL AND BOOSTING APPROACHES
Ashraf MW, Khan A, Tu Y, Ullah S, Wang C
|
|
65
POLYMER RIBLET SURFACE COATINGS FOR GREEN AVIATION
Song N, Banhalima A, Bordatchev E, Mamou M, Li L
|
|
67
DESIGN AND IMPLEMENTATION OF A COAXIAL PHOTOPOLYMER COMPOSITE EXTRUSION TO ENHANCE TENSILE PROPERTIES OF 3D PRINTED PARTS
Nayyeri P, Zareinia K, Bougherara H
|
|
68
LARGE AREA EXTRUSION BASED ADDITIVE MANUFACTURING OF A HIGH TEMPERATURE THERMOPLASTIC COMPOSITE & NON-PLANAR DEPOSITION FOR A LUNAR ROVER
Duchesne O, Verville M, Gosselin FP, Therriault D
|
|
69
HYBRID COMPOSITES WITH A BIO-INSPIRED HIERARCHICAL STRUCTURE FOR HIGH-PERFORMANCE STRUCTURAL APPLICATIONS
Cheung N, Aguiar R, Sansone N, Tuccitto AV, Lee PC
|
|
73
EXPLORING TENSILE STRENGTH UNCERTAINTY IN DISCONTINUOUS PREPREG PLATELET MOULDED COMPOSITE CONSIDERING PLATELET SHAPE AND SIZE STATISTICAL DISTRIBUTIONS
Chong M
|
|
74
DAMAGE MECHANISM IDENTIFICATION OF GLASS FIBER-REINFORCED POLYMER COMPOSITES BASED ON ACOUSTIC EMISSION AND UNSUPERVISED LEARNING ALGORITHMS
Palacios Moreno JA, Nazaripoor H, Mertiny P
|
|
75
APPLICATION OF FLEXURE TESTING FOR DETERMINATION OF TENSILE STRENGTH OF GFRP BARS
Lochan P, Polak MAA
|
|
76
VOXEL BASED MULTI-MATERIAL 3D PRINTING USING FUSED DEPOSITION MODELING
Bertram J, Jakubinek M, Garces I
|
|
77
INFLUENCE OF DISPLACEMENT RATE ON ELASTIC MODULUS OF 2D KEVLAR®/EPOXY TUBULAR BRAIDED COMPOSITES
Ead AS, Ayranci C, Carey J
|
|
78
MORPHOLOGICAL EVOLUTION OF CONTINUOUS FIBER NETWORKS DURING ADDITIVE MANUFACTURING
Peters N, Elderfield N, Sudak L, Wong J
|
|
79
PROPERTIES OF WOOD PLASTICS NANO-COMPOSITES MADE OF AGRICULTURAL RESIDUES AND URBAN RECYCLED POLYMER MATERIAL
Nourbakhsh Habibabadi A
|
|
80
VACUUM ASSISTED INDUCTION WELDING FOR ALL-THERMOPLASTIC SANDWICH PANELS ASSEMBLY
Martin RG, Johansson C, Tavares J, Dubé M
|
|
81
UNCERTAINTY IN THERMAL BEHAVIOR ANALYSIS OF POLYMER MELT EXTRUSION ADDITIVE MANUFACTURING
Azhdari S, Sharifan M, Genest M, Cole RG, Avalos A, Milani A, Kravchenko S
|
|
82
EFFECT OF SURFACE TREATMENT AND ADHERENT MICROSTRUCTURE ON THE FRACTURE TOUGHNESS OF ADHESIVE BONDED NCF COMPOSITES
Alfano M, Montesano J, Gao T, Chitsaz Dehaghani R
|
|
84
COMPRESSIVE FAILURE MODE PREDICTION OF 2D TUBULAR BRAIDED COMPOSITES WITH TWISTED FIBERS AND GRAPHENE INFUSED EPOXY
Frandsen EJ, Ead AS, Carey J
|
|
85
MODELING ANISOTROPIC THERMAL CONDUCTIVITY OF 3D PRINTED CARBON FIBER REINFORCED ULTEM
Ke T
|
|
86
CONTINUOUS FIBRE COMPOSITES OF DIFFERENT SUSTAINABILITY LEVELS
Robitaille F, Bernstein R, Roy C, Roberts D
|
|
87
A MACHINE LEARNING APPROACH TO PREDICT MECHANICAL PROPERTIES OF CFRPS USING WCM PROCESSING PARAMETERS
Sears J, Portela R, Johrendt J, Montesano J, de Faria A
|
|
88
COMPOSITES EDUCATION IN CANADA: A SURVEY OF COMPOSITE MATERIALS COURSE OFFERINGS AT CEAB ACCREDITED INSTITUTES
Keulen C
|
|
89
LOW-VELOCITY IMPACT (LVI) AND COMPRESSION AFTER IMPACT (CAI) OF DOUBLE-DOUBLE COMPOSITE LAMINATES
Shabani P, Li L, Laliberte J
|
|
90
UNDERSTANDING THE EFFECT OF GLOBAL BUCKLING ON COMPOSITES DAMAGE TOLERANCE
Li L, Vallée J, Shabani P, Laliberté J, Dondish A
|
|
91
MODELING PEEK CRYSTALLIZATION PROCESS UNDER A 3D PRINTING THERMAL PROFILE WITH FAST SCANNING CALORIMETRY
Hamid S, Azhdari S, Su T, Faysal AA, Lee P, Kravchenko S
|
|
92
ADDITIVE MANUFACTURING AND MECHANICAL BEHAVIOR PREDICTION OF MULTIFUNCTIONAL AEROSPACE COMPOSITES
Therriault D, Farahani RD, Chauvette J, Chenier G, Pierre J, Sosa-Rey F, Lampron O, Gregorio P, Lévesque M, Piccirelli N
|
|
93
NATURAL FIBER COMPOSITE FOR UAV: MATERIAL CHARACTERIZATION
Alzaid AF, Elruby A, Nakhla S
|
|
94
CHARACTERIZATION OF 3D-PRINTED BAMBU PAHT-CF COMPOSITE
Elsafty A, Elbanna H, Elruby A, Nakhla S
|
|
95
DIGITAL IMAGE CORRELATION OF E-GLASS/BECK GP 189 RESIN SOLUTION
Elsafty A, Elruby A, Nakhla S
|
|
97
ENERGY MODELLING APPROACHES FOR RESIN TRANSFER MOLDING SIMULATIONS
Sherratt A, Straatman A, Degroot C, Henning F
|
|
98
ABSORPTION DOMINANT EMI SHIELDING PERFORMANCE BY LAYERED NANOCOMPOSITE/FILM STRUCTURE
Habibpour S, Rahimi Darestani Y, Park C, Yu A
|
|
99
EVALUATION OF SHEAR TUFT RESPONSE CHARACTERISATION METHODS
Neyestani S, Joncas S, Pappas G
|
|
102
ASSESSING THE IMPACT OF ARTIFICIAL UV AGING ON THE MECHANICAL PERFORMANCE OF EPOXY COMPOSITES REINFORCED WITH FLAX: EXPLORING TENSILE STRENGTH PROPERTIES
Hadj-Djilani A, Toubal L, Bougherara H, Zitoune R
|
|
103
INTERLAMINAR SHEAR STRENGTH OF CARBON/PEEK THERMOPLASTIC COMPOSITE LAMINATE IN-SITU CONSOLIDATED BY AUTOMATED FIBER PLACEMENT PROCESS
Pourahmadi E, Shadmehri F, Ganesan R
|
|
104
EXPERIMENTAL DETERMINATION OF COMPLEX HEAT TRANSFER COEFFICIENT PATTERNS USING STATISTICAL INFERENCE
Bhattacharjee A, Gordnian K, Bhatia A, Tao G, Vaziri R, Campbell T, Poursartip A
|
|
105
THE USE OF NEURAL NETWORKS FOR PIEZOELECTRIC DAMAGE SENSING IN COMPOSITE AEROSPACE STRUCTURES
Chamberland OM, Bishop S, Laliberte J
|
|
106
INFLUENCE OF THE STABILIZING BINDER ON VOID CONTENT IN THICK WCM NON-CRIMP FABRIC COMPOSITE PARTS
Miranda Portela R, Hon N, de Faria A, Montesano J
|
|
107
INFLUENCE OF YARN TWIST ON THE ABRASION RESISTANCE OF TWARON 2D BRAIDED COMPOSITES
Bennett K, Mamun M, Frandsen EJ, Ead AS, Carey J
|
|
108
DYNAMIC AXIAL CRUSHING OF UD-NCF COMPOSITE CLOSED CHANNELS FOR CRASHWORTHINESS APPLICATIONS
Ajayi VAO, Worswick M, Montesano J
|
|
109
MULTISCALE FE MODELLING AND NEURAL NETWORK TO PREDICT THE RATE-DEPENDENT INELASTIC DEFORMATION RESPONSE OF NON-CRIMP FABRIC COMPOSITES WITH MANUFACTURING DEFECTS
Zeng Y, Rouf K, Montesano J
|
|
110
AN INVESTIGATION INTO SCIENCE-BASED AUTOMATION IN COMPOSITES MANUFACTURING
Bakhshi N, Yin X, Qiu R, Madden J, Poursartip A
|
|
111
COMPARISON OF PEEL STRENGTH OF MULTILAYER POLYMER-BASED PIPE IN AXIAL AND CIRCUMFERENTIAL DIRECTION
Dua M, Hammami A, Mertiny P
|
|
112
PRELIMINARY ANALYSIS OF DYNAMIC FREQUENCY, PREFORM ARCHITECTURE, AND THEIR EFFECTS ON THE FATIGUE LIFE OF TUBULAR BRAIDED COMPOSITES
Lepp E, Carey J
|
|
114
MODELING OF HYPERVELOCITY IMPACTS ON CFRP COMPOSITES USING AN ADAPTIVE FEM-SPH METHOD
Gudisey A, Cherniaev A
|
|
115
DEVELOPMENT AND IMPLEMENTATION OF A STRAIN RATE-DEPENDENT ELASTO-PLASTIC FAILURE MODEL FOR FRP COMPOSITE MATERIALS
Rouf K, Koltzenburg N, Worswick M, Montesano J
|
|
117
EXPERIMENTAL, ANALYTICAL AND NUMERICAL STUDY OF BUCKLING OF CARDBOARD ANGLE
Hénault S, Jean-St-Laurent M, Cormier L
|
|
118
DEVELOPMENT OF FINITE ELEMENT MODEL OF A PENTAMODE STRUCTURE FOR PREDICTING THE COMPRESSIVE MECHANICAL BEHAVIOUR INCORPORATING MACHINE LEARNING AND POROUS PLASTICITY MODELS
Mohammed A, Kolasangiani K, Nayyeri P, Bougherara H, Oguamanam D
|
|
119
THE INTEGRATION OF 3D PRINTED CONDUCTIVE COMPOSITE MATERIALS IN TEXTILE-BASED WEARABLE TECHNOLOGY
Solmon RJ, Fayazbakhsh K
|
|
120
DEMONSTRATION OF MODEL-BASED CONTROL OF THERMOPLASTIC CONTINUOUS RESISTANCE WELDING
Barroeta Robles J, Palardy-Sim M, Stanczak J, Roy S, Ferland F, Elame HRJ, Laurin H, Octeau M, Yousefpour A
|
|
122
CO-CONSOLIDATION ROBOTIC 3D PRINTING: A NOVEL APPROACH FOR MANUFACTURING THERMOPLASTIC SANDWICH PANELS
Osorio Marino S, Fayazbakhsh K
|
|
123
VACUUM ASSISTED MULTI-DIE PULTRUSION OF GLASS/POLYAMIDE 6 AND GLASS/POLYPROPYLENE
Pessoa S, Baril-Gosselin S, Laberge Lebel L
|
|
126
PLY-TOOL AND PLY-PLY FRICTION CHARACTERIZATION OF A BINDER STABILIZED UNIDIRECTIONAL NON-CRIMP FABRIC
Mohammadi Z, Ghazimoradi M, Montesano J
|
|
127
RECONFIGURABLE GRIPPER DESIGN: AN ORIGAMI SOLUTION FOR THE AUTOMATED PICK AND PLACE OF COMPOSITE TEXTILES
Strelkova D, Vo D, Urbanic J, Alebooyeh M
|
|
128
MICROMECHANICAL ELASTOPLASTIC MODELING AND CHARACTERIZATION OF 3D PRINTABLE BIOPOLYMER NANOCOMPOSITES
Saadatmand Hashemi SS, Willett TL, Montesano J
|
|
130
PROPOSED SIEVING PARAMETERS FOR MECHANICALLY RECYCLED GLASS FIBER COMPOSITES
Wang Z, Yan Z, Rezaee Fakhr S, Lessard L
|
|
133
EFFECTS OF PROCESSING PARAMETERS ON THE PROPERTIES OF CF/PPS LAMINATES MANUFACTURED BY LASER-ASSISTED IN-SITU CONSOLIDATION
Liu W, Zhao D, Pan L, Yue G
|
|
134
EXPLORING THE EFFECT OF WOOD ASH TREATMENT ON THE MECHANICAL PERFORMANCE OF BANANA FIBRE FOR COMPOSITE APPLICATION
Sodagar M, Ramasawmy H, Gries T
|
|
135
RECYCLING AND REUSE OF POLYMER PULTRUDED GLASS-FIBER COMPOSITES AND RESIN WASTE
Basaran I, Power J, Yobouet L, Stewart W, Morin B, Landry B, Robichaud J, LaPlante G, Djaoued Y
|
|
136
INTEGRATION OF INFRARED THERMOGRAPHY AND DIC FOR DAMAGE CHARACTERIZATION IN NON-CRIMP FABRIC REINFORCED POLYMER MATRIX COMPOSITES
Shi E, Qazi H, Montesano J
|
|
137
DESCRIBING THE STRESS RELAXATION BEHAVIOR OF PREPREG USING A FRACTIONAL-ORDER VISCOELASTIC MODEL
Liu J, li z, Chang L, Shao C, Zhao T
|
|
139
MORPHOLOGICALLY-ENGINEERED LASER-INDUCED GRAPHENE/PDMS STRETCHABLE SENSORS FOR LARGE DEFORMATION MEASUREMENT IN FABRIC REINFORCEMENTS
Amindehghan MA, Seethaler R, S Milani A
|
|
141
DEVELOPING AN MACHINE LEARNING MODEL FOR DISTINGUISHING FIBER ORIENTATION USING ACTIVE ULTRASONICS
Bedrosian AD, Thompson M, Hrymak A, Lanza G
|
|
147
HIGH-TEMPERATURE POLYMER COMPOSITE ADDITIVE MANUFACTURING FOR ELECTRONIC TOOLING
DeGrange J, Melenka GW
|
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.